Bio-Klenz is a fast-acting BIO-CLEANER especially developed for the hot water environments of Spa Pools and Hot Tubs to remove BIO-FILM from pipework, filters and spa surfaces.
Bio-Klenz, Used MONTHLY, will protect your Spa Pool or HotTub all year round. It will keep your water in the freshest, cleanest and highest quality condition that you've ever experienced.
Bio-Klenz should reduce your overall maintenance chemical costs and increase the clarity and brilliance of your water. It also enhances your filter's ability to filter finer particulates and contaminates.
* Save money and maintenance time
* Enjoy clearer water
* Useless sanitiser
* Water will look and smell fresh
* Water will feel soft and silky
*Heater element(s) will stay cleaner
*Operate pump(s) less per day, week or month
DIRECTIONS
DOSAGE: Add 250ml of BIO-KLENZ per 1000 litres of water MONTHLY
INSTRUCTIONS:
1. Ensure sanitiser is present during treatment.
2. Check that both pH and Total Alkalinity levels are within correct parameters.
3. Add required amount of BIO-Klenz (as per Dosage above)
4. Run pump to circulate.
5. Repeat treatment with Bio-Klenz every 28-30 days.
NOTES:
For best results add to hot or warm water.
This product is not a substitute for a pool sanitiser.
Foaming is NORMAL.
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only.
Spa-Professor recommend you read the full instructions on all chemical containers.
We will not accept responsibility for the use of these products.
